|
|
|
|
||||||||||||||||||||||||||||||
>
|
|
 |
|
 |
|
 |
|
| A. Ventilator •Ventilation mode£ºIPPV SIPPV SIMV CPAP SIGH Respiratory rate£º6bpm-60bpm I/E Ratio£º1:0.5¡¢1:1 ¡¢1:1.5¡¢1:2¡¢1:3 Tidal Volume£º80mL-1200mL,Display Tidal Volume and Respiratory Rate for Manual Mode (Ohmeda flow measuring system) Trigger sensitivity£º0-2kPa (compared to PEEP) Colored LCD+high-luminance LED display Waveform£ºairway pressure waveform Monitoring parameters£º Minute volume Respiratory rate Airway pressure (Ppeak Pmean PEEP) Alarms£º Upper or Lower airway pressure limit Upper or Lower tidal volume limit Upper or Lower minute volume limit Apnea£º Power supply failure Trend curve£ºfull parameters 24-hour trend curve Communication port£ºRS-232 B. Vaporizer •ACM608(C) is incorporated with two ACM108/105 vaporizers, one using enflurane as the anesthetic agent, the other using isoflurane The vaporizers can interlock Concentration control range£º0.2-5%VOL The function of flow and temperature compensation Penlon Delta vaporizer imported from England can also be chosen. C. Anaesthesia machine •Flowmeter£º O2/N2O four-tube flowmeter Slim tube£º0.1L/min-2L/min Wide tube£º2.5L/min-10L/min Oxygen Failure Protection Device£º Regulated the flow of the O2 and N2O by the device to assure the percentage of the O2 concentration is not lower than 25%. Safety performance£º Alarm for oxygen supply failure Cut-off of the N2O APL valve Safety valve O2 flush£º35L/min-75L/min Gas supplies£º O2£º0.3MPa-0.4Mpa N2O£º0.3MPa-0.4MPa Insight Patient Monitor for monitoring patient¡¯s physiological parameters Operating Information System for recording the operation process |
|
|
|
|
|
|
|
|